Toll Free 1-888-244-6632 | Accessories ONLY 1-855-299-7244

Free Shipping Accord LED Interior Lighting Kit
    Close

    Description

    Replace your stock interior incandescent bulbs with bright white LEDs. Each pull roughly 1 watt of power instead of 8 watts for stock bulbs. With the low wattage draw these lights will help save your battery when lights are accidentally left on for long periods of time. *Not a Genuine Honda product. NOTE: This kit provides lighting for the interior ONLY. If you wish to purchase any bulbs for the exterior those can be ordered a la carte.

    What is in the package?

    2008-2012 Accord 2dr - (3) Festoon LEDs, (4) Fuse LEDs, and (1) 6 LED Wedge
    Replaces 2 map lights, 1 dome light, 4 vanity lights and 1 trunk light.

    2008-2012 Accord 4dr - (3) Festoon LEDs, (4) Fuse LEDs, (2) 5 LED Wedges and (1) 6 LED Wedge
    Replaces 2 map lights, 1 dome light, 4 vanity lights, 2 courtesy lights and 1 trunk light.

    2013-2016 Accord 4cyl - (3) 5 LED Wedges, (4) Fuse LEDs and (1) 6 LED Wedge
    Replaces 2 map lights, 1 dome light, 4 vanity lights and 1 trunk light.

    2013-2016 Accord V6 - (5) 5 LED Wedges, (4) Fuse LEDs and (1) 6 LED Wedge
    Replaces 2 map lights, 1 dome light, 4 vanity lights, 2 courtesy lights and 1 trunk light.

    CAUTION

    To help prevent blowing a fuse when installing bulbs, makesure the light switch is off. Install the bulb then test. Some bulbsare polarized so if they don't light the first time, turn off the switch, pull out the bulb and install it the other way around.

    Vehicle Applications

    2008-2017 Accord 2dr
    2008-2017 Accord 4dr

    Installation Instructions

    Video

    Additional Product Notes

    When installing make sure power is off first. This will prevent an electrical short. Some bulbs are polarized. If any bulbs do not light up, take them out, turn them around and reinstall. If the back of a festoon bulb comes in contact with metal it can short out. As a precaution it is recommended that you simply put electrical tape over the back of the bulb (festoon style only) to prevent possible contact with any metal surface.